Results 1 to 1 of 1
  1. #1
    Anko's Avatar
    Sexy A.I. Girls
    Posting Award

    Join Date
    Apr 2010
    Location: Bringin the art Here!

    Info Green Create a Detailed Vintage Television Icon in Photoshop

    While Photoshop is a very powerful raster-based image editor, it also comes stocked with many powerful vector-based editing tools. In today’s tutorial, we will demonstrate how to create a detailed vintage television icon using Photoshop’s vector editing capabilities. This tutorial is an excellent example of how Photoshop’s vector tools can be combined with layer styles to produce an illustration that is not only editable but scalable as well.

    Step 1

    Create a new document, size 800 px wide and 600 px high at a resolution of 72 pixels/inch.

    Step 2

    Use the rounded rectangle tool with radius of 10 px to create a dark brown rectangle. Give it a Layer Style and an Inner Glow.

    Step 3

    Still using the rounded rectangle tool, draw a small rectangle inside the previous rectangle. Use a gray color.

    Step 4

    With the rectangle tool, draw a smaller rectangle. This time use a lighter gray (4a). Add some layer styles (4b). These layer styles will add depth to the rectangle (4c). This rectangle will be the base for our TV screen.

    Step 5

    Now we’ll add a subtle texture. Alt+click New Layer icon. In the next dialog box select Use Previous, Mode: Multiply, and Fill with.

    Step 6

    Select Filter > Noise > Add Noise (6a) and Filter > Blur > Motion Blur (6b). Lower the layer’s opacity to 50%. This will add a subtle texture to the surface.

    Step 7

    Now, we will start work on the screen. Using the rounded rectangle tool with Radius of 30 px draw a rectangle.

    Step 8

    Select screen path with selection tool (the black arrow). Activate pen tool and click top half of the rectangle. See the picture below. This will add a new point to the path (8a).

    Do the same to the other side of the rectangle (8b).

    Step 9

    Using the direct selection tool (the white one) move the two points in the corner closer (9a).

    Do the same to the other corners (9a).

    Step 10

    Add these layer styles to the screen (10a). The screen will have some shadow in it (10b).

    Step 11

    Next, we need to add some scan lines (vertical lines inside the screen). Create a new layer and draw a white vertical line using the brush tool. Use master diameter 4px and 0% hardness.

    Step 12

    Now we need to duplicate the vertical line that we created in step 11 and arrange it as shown below. To do this we will want to use some shortcuts. Ctrl+click layer to select the line. Hit ctrl+alt+T to transform and duplicate it. Hit shift+right arrow to move it 10 px to the right. Hit Enter to accept the movement. Now press ctrl+shift+alt+T over and over until you have lots of lines.

    Step 13

    Hit Cmd+T for Transformation. Right click and choose Warp. In the option bar choose Inflate, adjust Bend setting until it matches the screen’s curvature.

    Step 14

    Cmd+click screen shape to create selection based on it. Click add layers mask icon and change layer’s opacity to 3%.

    Step 15

    Now it is time to add the screen highlight. Cmd+click screen shape. Click Layer > New Fill Layer > Gradient.

    Step 16

    Paint top left highlight to reveal shadow on the screen.

    Step 17

    Add a vector mask by clicking add layer mask icon again. Draw path like shown below.

    Step 18

    Change the layer’s opacity to 30%. So far, here’s what we have.

    Step 19

    Now it is time to add a channel button. Start by drawing a circle shape and add some layer styles (19a).

    Step 20

    Draw smaller circle on top of the previous circle. Add layer styles as shown below.

    Step 21

    Now we will create a ring shape. Create a smaller circle. Select the path and duplicate it and resize it to a smaller size. Select both paths and in the option bar choose exclude (21a).

    Add the following layer styles: Drop Shadow, Inner Glow, Inner Shadow, and Gradient Overlay (21b) as shown below.

    Step 22

    Create a smaller circle inside the ring (22a). Add layer styles as shown in figure (22b).

    Step 23

    Draw a rectangle in the middle of the circle (23a). Add layer styles as shown in figure (23b).

    Step 24

    Add a number 1 above the button selector. Add a small Drop Shadow and white Color Overlay to make it more readable.

    Step 25

    Now we need to add more numbers. Hit Cmd+alt+T. Hold alt and move transformation pivot (crosshairs in the middle of transformation box) to the middle of the button. Shift+drag to rotate number 30 degree. Repeat the transformation and duplication by pressing Cmd+shift+alt+T. Finally, change the number.

    Step 26

    Now we need to fix the number’s orientation. Rotate each number as shown.

    Step 27

    Duplicate the button by alt+dragging to new location. This will be the button for frequency so change the numbers to 10, 20, 30, and so on.

    Step 28

    Next, add the TV’s brand and small volume button. Draw a rectangle below the screen and add an Inner Glow and gray Color Overlay.

    Step 29

    Draw the TV’s logo and it’s brand. I used a simple red green blue box here. To make the text stand out I added a Drop Shadow and Satin layer style.

    Step 30

    For the volume button’s base draw a small circle and add an Inner Shadow and dark gray Color Overlay.

    Step 31

    For the button add a smaller circle and give it an Inner Shadow, Satin, and lighter gray Color Overlay. Don’t forget to add VOLUME label and + – sign.

    Step 32

    Let’s add the speaker hole. Start by drawing one small circle. Select its path, hit Cmd+alt+T, and move it to the right. Duplicate again with Cmd+shift+alt+T. Repeat this until we have a row of holes.

    Step 33

    We still need more holes. To do this just repeat the previous step, only this time we will move them down. Select all paths, hit Cmd+alt+T, move it down. Duplicate them with Cmd+shift+alt+T.

    Step 34

    To turn the circles into holes we need to add an Inner Shadow and dark gray Color Overlay.

    Step 35

    Draw a black circle. Cmd+click small circles to create selection. Click add layer mask icon so the black circle will be inside the holes.

    At this point, we have just finished creating the TV’s body. Next, we’ll work on its lower part.

    Step 36

    For its base draw a rectangle and click Edit > Transform > Perspective. Move lower corner closer.

    Step 37

    Now let’s add some additional buttons under the screen. This might be used for brightness, contrast, color, and noise. We can just duplicate the volume button and add a very dark gray Color Overlay to make it darker.

    Step 38

    Now it is time to add a headphone plug. Start by drawing a black circle. Add an Inner Shadow and dark Inner Glow. Change its fill to 0%.

    Step 39

    Add a smaller circle inside it and Add an Inner Shadow, dark Outer Glow, and a dark Inner Glow. Change its fill to 0%.

    Step 40

    For the hole, just draw a black circle inside it.

    Step 41

    Almost done! Create a new layer below every other layer. Create an ellipse selection and fill it with black. Click Filter > Blur > Gaussian Blur with a 7 px radius.

    Step 42

    The TV still looks like it is floating. To fix this, use a soft brush and paint it black where the TV touch the floor.


    That’s it. We’re done. I hope you learned something new from this tutorial. You can view the final image below or view a larger version here.

    Last edited by TCG-Admin; 08-21-2014 at 01:15 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Replies: 0
    Last Post: 02-11-2013, 07:06 PM
  2. Create a Detailed Electronic Keyboard in Photoshop
    By Anko in forum Anko's Photoshop Tutorials
    Replies: 0
    Last Post: 06-27-2012, 04:36 AM
  3. Create a Detailed Ornate Heraldic Design in Photoshop
    By Anko in forum Anko's Photoshop Tutorials
    Replies: 0
    Last Post: 09-13-2010, 04:16 AM
  4. Create a Realistic iMac Icon in Photoshop
    By Anko in forum Anko's Photoshop Tutorials
    Replies: 0
    Last Post: 09-01-2010, 11:18 AM
  5. Create an Electrical Outlet Icon in Photoshop
    By Anko in forum Anko's Photoshop Tutorials
    Replies: 0
    Last Post: 08-30-2010, 09:08 AM